Deep Suction Water Pump for Industrial Water Supply Systems
Deep Suction Water Pump from Shanghai Gaotian is built for water supply pressure boosting circulation transfer and industrial process pumping. The pump selection focuses on stable flow reliable sealing practical installation and service support for export projects. It is suitable for building water supply HVAC circulation irrigation process water transfer and plant utilities where buyers need consistent performance clear model matching and dependable after sales communication from a pump manufacturer.
Deep Suction Water Pump for Industrial Water Supply Systems Applications and Related Pump Solutions
Deep Suction Water Pump description
Using advanced hydraulic models and structural designs, as well as various new processes such as epoxy coating in the blade flow channel, the product demonstrates excellent performance and long service life. The pump boasts high efficiency, a smooth efficiency curve, a wide operating range, and a 10-20% increase in working range, resulting in significant energy savings. It incorporates a sand-flinging device and labyrinthine structure to prevent sand particles from entering the bearings. Both the impeller shaft and motor shaft are supported by copper bearings, ensuring radial runout is controlled within the US standard of 0.13. The pump operates smoothly and quietly and can feature a specially designed closed transmission system. Additionally, it can be made with ductile iron or various grades of stainless steel to meet different specific usage conditions and technical requirements of customers.
Flow rate Q: 2400m3/h
Head H: 250m
Deep Suction Water Pump Application range
Waterworks, hydropower stations, thermal power plants, steel plants, agricultural irrigation, fire protection, municipal engineering, etc.
Deep Suction Water Pump structure
1. Motor: Special hollow shaft motor (YLB type) for deep well pumps, or solid shaft ordinary vertical motor;
2. Adjustment nut: Adjusts the axial clearance of the impeller;
3. Pump base: Bears the heavy load and facilitates the installation of the stuffing box;
4. Pre-lubrication plug: Before starting, inject clean water through this point to lubricate the internal bearings of the pump;
6. Upper short pipe (Short pipe B): Connected by flanges, the upper flange of the short pipe is connected to the pump base, and the lower flange is connected to the flange of the lifting pipe;
9. Impeller shaft: 2Cr13 stainless steel or 45# carbon steel (chrome plated surface);
10. Middle casing: Smooth flow passage, reducing frictional resistance and improving efficiency. Materials: HT200, QT450, 2Cr13, 304, 316, etc.;
11. Impeller: Designed to work in conjunction with the middle casing, efficient, with a wide operating range, and undergoes precise static balancing to ensure smooth operation. Materials: HT200, silicon brass, QT450, 2Cr13, 304, 316, etc.;
12. Middle casing bearing: Copper bearing, wear-resistant rubber bearing, or imported polymer bearing. Reliable operation and long service life.
13. Cone sleeve: Reliably secures the impeller to the impeller shaft.
15. Lower casing bearing: Copper bearing, filled with grease, for long-term trouble-free operation.
16. Lower casing: Uniformly directs the liquid from the filter screen to the impeller with minimal loss. Materials: HT200, QT450, 2Cr13, 304, 316, etc.;
17. Filter screen: The length of the filter screen should be suitable to achieve an excellent state and prevent large particles from entering the water pump;
18. Drive shaft: High-strength carbon steel, chrome-plated surface at the bearing position. Stainless steel material can be provided as needed;
22. Lifting pipe: Can be installed using threaded or flange connection methods.
Deep Suction Water Pump section drawing
Related pump products: Magnetic Drive Pump for Industrial Water and Chemical Transfer, G Type Screw Pump for Viscous Fluid Transfer Applications, Double Suction Split Casing Pump for Industrial Water and Chemical Transfer.
