sewage pump

- Media Temperature: <60°C, Viscosity: 1-1.3 kg/dm³, pH Range: 5-9 - Flow Rate: 12-950 m³/s, Head: 7-35 m - Motor Power: 0.75-110 kw, Outlet Diameter: 40-300 mm - For pumps without internal recirculating cooling system, motor exposure to liquid surface should not exceed half. - Main components made of cast iron, suitable for non-corrosive liquids only.

Number of Blades: Single Stage Customized Processing: Yes Rated Pressure: 0.15Mpa Material: Stainless Steel Power: 0.75kw Rated Speed: 2900r/min Inlet Diameter: 40mm Outlet Diameter: 40mm Weight: 15kg

Submerged Pump is primarily suitable for conveying corrosive, coarse particles, and high-concentration slag slurry. It is widely used in metallurgy, mining, coal, electric power, building materials, environmental protection, and other sectors .

The purpose of a water pump is to transport water from one place to another or to increase pressure by converting mechanical energy into liquid energy. The diesel engine water pump, also known as a diesel engine-driven pump, refers to a pump set driven by a diesel engine through an elastic coupling, which has a reasonable structure, high efficiency, good cavitation performance, low vibration and noise, stable and reliable operation, and easy installation and removal. The liquid discharge outlet on the pump casing is connected to the discharge pipe.

Stainless Steel Precision Casting Oil-filled Submersible Pump pump (hereinafter referred to as electric pump) consists ofthree parts: water pump, seal and electric motor, The pump is located in the upper part of theelectric pump, it is a centrifugal or axial flow structure. The motor is located at the lower part ofthe electric pump and is oil-filled, Three-phase asynchronous motor, A double- end mechanicalseal is used between the water pump and the motor, and the fixed seals are made of "oil-resistant rubber" for staticsealing.

The WQX Series represents a paradigm shift in submersible pump technology, integrating aerospace-grade materials with hydrodynamic innovation to deliver uncompromising reliability in sewage, industrial effluent, and high-solids fluid transfer.

The Stainless Steel High-lift Sewage Pump stands out for its corrosion resistance, high-lift capability, efficient sewage handling, and reliable performance. It boasts advanced technology, versatile applications, environmental friendliness, and comprehensive support, setting a new standard in sewage pumping.

Conditions Of Use 1.According to the concer of the impeller,the max immersion depth is 5m 2.Max temperature of the conveying is 60℃ 3.The PH value of convey temperature is 304(4-10),316(4-13) 4.Kinematic viscoslty of transport mudlum is7x10-⁷~23x10-⁶m²/S

​High-capacity handling: Efficiently pumps large volumes of sewage and sludge, ideal for industrial/municipal use. ​Durability: Built with corrosion-resistant materials for harsh environments and long service life. ​Automated & energy-efficient: Self-priming, non-clogging design with low power consumption for cost-effective operation.